PTFE teflon resin
Suspended medium grain
Clean plate surface,uniform quality,not allowed existing any impurity.
The cross section of diameter 57mm has no obvious color difference.
Clean plate surface,uniform quality,not allowed existing any metal impurity.
Small or equal 1mm impurity can not exist more than 2 pcs.
Tensile strength Mpa ≥
Breakage elongation % ≥
Volume density g/l
Average grain size µm
Moisture content % ≤
Melting point ℃
Standard specific gravity
Thermal instability index ≤
Electric intensity MV/mm
Fit for producing thin film,sheet,rod,gasket,bearing products
and presintering material etc.
1. PTFE packed in double layers plastic bags.Outer side is hard circle drum.
The package are all with label,certificate of approval,trademark,executive standard,variety,mark,grade,batch number,net weight,packed date,inspector,packer.
2. PTFE should be stored in clean,dry warehouse,avoiding for
dust,moisture etc impurity mixed.
3. This chemical is transported as non-dangerous goods.
During the transport,it should be avoiding for being heated,moisture,frozen and strenuous vibration.
Excessive turbulence and extrusion makes the resin block easily.
The particle size is uniform,suitable for making big sheet and turning film.
Has good fluidity easy to extend and easy to separate after sinter.
Can replace some products of molding powder and has good brightness in the appearance.
Application: Producing tube,rod,plate and seal material etc.
Package: 25 kg/paper drum.
Inner packed in sealed PVC bag,outer in moisture-proof paper drum.
Avoid: During the transportation and storage,avoid heavy shaking and prevent from solarization.
It is better to be loaded in refrigerator during the transportation.
Stored in clean,cool and dry warehouse,prevent from agglomeration and contamination.
Can supply sample to test before order.
ptfe teflon resin ptfe teflon resin